- Re-submitted the package due to the removal & readmittal of the
`iemiscdata`

package. - Replaced as.numeric with drop_units in the engr_survey function. Made other revisions in the engr_survey & engr_survey_reverse functions.
- Revised the reduce_single_digit function to allow for dates with /s

- Received an e-mail issue from Kurt Hornik on 19 August 2023 regarding the use of “@docType package” which is no longer valid. Replaced the iemisc.R file with iemisc-package.R to reflect the requested change.
- Added the
`chem.databases`

package to Imports to replace`CHNOSZ`

which has been removed from Imports - Added
`printr`

to Suggests to allow the printing of help functions in the vignettes & added`tibble`

and`lintr`

to Suggests - Modified the Help section on the README again & Added the additional available function to the README
- Revised the URL for Urban Hydrology for Small Watersheds Technical
Release 55 (TR-55) in the weighted_CN function Reference. Revised
various other URLs to get
`iemisc`

accepted into CRAN. Used the ResearchGate version of certain articles or the Internet Archive: Wayback Machine archive for other URLs that had issues. - Revised the air_stripper function to search for the CAS Number in
the atsdr_tsca_ld50_a data set of the
`chem.databases`

package. Also revised the package to obtain the molecular formulas and average mass from the chem_wiki data set of the`chem.databases`

package - Added the “%inorder%” function to return character vectors in a given sequence
- Added the c_composite_CN function for connected impervious areas
- Added the uc_composite_CN function for unconnected impervious areas
- Replaced the T for temperature variable with Temp for temperature in
all functions after doing a
`lintr`

check on the package to attempt to locate an error causing the references not to be valid in the Manningtrap function - Added an additional contributor for the “%inorder%” function
- Created the Sound Frequencies & Nikola Tesla’s 3-6-9 Theory vignette and modified all other vignettes. The most significant revisions were made in the Comparing Other Hydraulic Software Output to iemisc’s Manningtrap for Critical Conditions & Construction Measurement Examples vignettes

- Modified the Help section and the package introduction on the README
- Revised the non-standard evaluation of library calls to standard evaluation calls in the README and in all functions
- Revised some grammatical issues in various functions
- Revised the splitcomma function to allow for a set of names in a single character vector to be separated by ” & ”
- Revised the reduce_single_digit function to allow for date times and vectors with decimals
- Revised all of the vignettes – removed the PNG image for the Creative Commons license due to it failing consistently on certain OSes. Also added the EcoC²S services link to all of the vignettes as well.
- Added the notchin function (Negate chin from
`data.table`

and Negate in from`base`

R) to determine which character or numeric vectors are not in a set of character or numeric vectors - Added the surface_area (for calculating the linear surface area) & rain_garden_driveway (for sizing a rain garden based on driveway surface areas) functions
- Removed
`qdapTools`

from Imports as Prof Brian Ripley sent an e-mail that`qdapTools`

is scheduled for archival on 6 May 2023 due to failing the CRAN checks. The lookupQT (lookup in`qdapTools`

) and lookup_helperQT (lookup_helper in`qdapTools`

) functions have been added to the package to avoid`iemisc`

from being archived on that date too. The existing functions have been modified to use lookupQT instead of lookup.

- CRAN update to move from archived back to active state
- Added
`formatR`

to Suggests to fix the CRAN ERROR message on certain systems & added`pander`

to Suggests to print better LaTeX tables for the vignettes. Some of the tables in the vignettes are created using kable from`knitr`

. - Modified
`octave`

to`octave eval = FALSE`

in vignettes where GNU Octave was called to avoid the CRAN ERROR message on certain systems where GNU Octave was not present - Added a check in the frac_to_numeric function to issue an error message when the length of n > 1 exists to correct the failed tests on some systems
- Added both author and encoding fields to the various functions where those 2 items were missing [f2, f3, f4, f5, f6, f7, f8, kin_visc_water, lat_long2utm, Manningcircy, Manningtrap_critical, Re2, Re3, Re4]
- Added more assert_that clauses to both the weighted_CN and weighted_C functions
- Modified the vignette encoding for all of the vignettes
- Added the rational_equation function which calculates the peak flow using the modified rational method equation

- Received an e-mail issue from Prof Brian Ripley on 13 February 2023 regarding the check results which need to be corrected
- Re-added
`ie2misc`

to Suggests to fix the CRAN NOTE - Changed an instance of http to https in all of the vignettes

- created the following new functions: “%//%”, “%qsin%”, CompIntCharg, Manningtrap_critical, Mod_octave, Re1, Re2, Re3, Re4, Rem, SimpIntCharg, air_stripper, colebrook, concr_mix_lightweight_strength, concr_mix_normal_strength, construction_decimal, construction_decimal_eng, construction_fraction, density_water, dyn_visc_water, engr_survey, engr_survey2, engr_survey3, engr_survey4, engr_survey_batch, engr_survey_reverse, f1, f2, f3, f4, f5, f6, f7, f8, frac_to_numeric, fractdiff, igivenICPn, iscolumn, isrow, kin_visc_water, lat_long2state, lat_long2utm, maxmre, mortality_rate, mortality_rate_pct, mre, ndims, polygon_area, project_midpoint, prop_mortality_ratio, prop_solver, reduce_single_digit, sat_vapor_pressure, sat_vapor_pressure_ice, sec, secprop, sp_gravity, sp_volume, splitcomma, splitremove, surf_tens_water, unit_wt, weighted_C, and weighted_CN
- These were the previous functions available as of
`iemisc`

0.9.9: AF, AP, AgivenF, AgivenFcont, AgivenG, AgivenP, AgivenPcont, CompIntPaid, EffInt, FA, FP, FgivenA, FgivenAcont, FgivenP, FgivenPcont, Manningcirc, Manningcircy, Manningpara, Manningrect, Manningtrap, Manningtri, PA, PF, PgivenA, PgivenA1, PgivenAcont, PgivenF, PgivenFcont, PgivenFivary, PgivenG, SimpIntPaid, acosd, acotd, acscd, approxerror, asecd, asind, atan2d, atand, benefitcost, cosd, cotd, cscd, cv, igivenPFn, length_octave, n, na.interp1, nc1, nc2, nc3, nc4, ngivenPFi, numel, ranges, relerror, righttri, rms, secd, sgm, shm, sind, size, tand, and volsphere - Revised the CITATION file
- Removed
`Rcpp`

(>= 0.11.5),`ie2misc`

,`NISTunits`

, and`optiRum`

from Suggests &`testit`

and`rgdal`

(being retired in 2023) from Imports - Added the following packages to Imports:
`anytime`

,`assertthat`

,`berryFunctions`

,`checkmate`

,`foreach`

,`geosphere`

,`ggplot2`

,`ggpubr`

,`lubridate`

,`matlab`

,`matlab2r`

,`measurements`

,`methods`

,`mgsub`

,`qdapRegex`

,`qdapTools`

,`ramify`

,`rivr`

,`roperators`

,`round`

,`sf`

,`signal`

,`sjmisc`

,`units`

,`USA.state.boundaries`

, and`utils`

- Added
`assertthat`

and`checkmate`

to Imports to simplify the internal testing of the package functions (previously if-else statements were used). Made revisions to all of the functions to use the newly imported packages. - Added the following packages to Suggests:
`aiRthermo`

,`callr`

,`flextable`

,`fractional`

,`fracture`

,`geometry`

,`hydraulics`

,`import`

,`linguisticsdown`

,`maps`

,`MASS`

,`rando`

,`sampler`

,`spelling`

, and`tinytest`

- Added
`rando`

to Suggests. Replaced set.seed and rnorm from`stats`

with set_n and r_norm from`rando`

in the examples. - Created passing tests for many of the functions using
`tinytest`

- Revised existing vignettes and created new vignettes. Added more examples and/or vignettes for the pre-existing functions. Many of the examples and/or the functions themselves for the previous functions were revised too.
- Used the Internet Archive Wayback Machine to retrieve lost URLs, as needed
- Changed most import statements to importFrom statements after an
issue was filed about
`data.table`

and`zoo`

conflicts (Issue #3 by Toby Dylan Hocking) - Now using the try function for examples that may possibly fail (source references are in the function source declarations)
- Replaced round with round_r3 throughout the functions
- Added the f1, f2, f3, f4, f5, f6, f7, f8, and colebrook functions to deal with the Darcy friction factor (f)
- Added the Re1, Re2, Re3, and Re4 functions to calculate the Reynolds number
- Added the weighted_C and weighted_CN functions for the weighted C factor and the weighted curve number, respectively
- Added the Manningtrap_critical function to calculate the critical values for a trapezoidal open channel cross-section.
- Added the sat_vapor_pressure, sat_vapor_pressure_ice, density_water,
dyn_visc_water, kin_visc_water, sp_gravity, sp_volume, unit_wt, and
surf_tens_water functions to replace the former dependency on the
archived
`IAPWS95`

package and for use in the open channel flow functions (Manning…) - Added the engr_survey, engr_survey2, engr_survey3, engr_survey4, engr_survey_batch, engr_survey_reverse, lat_long2state, project_midpoint, and lat_long2utm functions for dealing with engineering survey measurements mostly in Kentucky and Tennessee, but also globally for other functions
- Added the air_stripper function to size air strippers for removing volatile organic compounds from liquids
- Added the concr_mix_lightweight_strength [Concrete Mix Design for
Structural Lightweight Concrete] and concr_mix_normal_strength [Concrete
Mix Design for Normal Strength Concrete] functions. The trial batch
volume can be specified for the concr_mix_normal_strength function. For
the use of Table 3.3 (determining the water-cement ratio by weight) in
the concr_mix_normal_strength function,
`pracma`

s interp1 is now used for the cases where the compressive strength value is not present in the Table (see the Reference source for the Table). - Added secprop function to calculate and plot section properties. It was written for compatibility with a GNU Octave/MATLAB function.
- Added polygon_area function to calculate the area of a polygon using the Shoelace formula and to plot the polygon
- Added SimpIntCharg and CompIntCharg functions to calculate the simple interest and the compound interest charged only
- Added the igivenICPn function to calculate the simple interest rate given interest charged, number of years, and principal value
- Changed the output table format for benefitcost function from a
`data.frame`

to a`data.table`

- Added the construction_decimal, construction_fraction, construction_decimal_eng, and frac_to_numeric functions to work with construction measurements. Also, frac_to_numeric can work with plain fractions.
- Added ndims, isrow, iscolumn, sec, fractdiff, Mod_octave, and Rem functions & modified the size function for GNU Octave/MATLAB compatibility
- Added floor division (“%//%”) function for Python compatibility
- Added “%qsin%” function to perform a quick search
- Added the splitcomma and splitremove functions to transform Second String, First String to First String Second String and remove certain characters from a string, respectively
- Added maxmre and mre functions to calculate the maximum mean relative error (MAXRE) and mean relative error (MRE), respectively
- Added mortality_rate, mortality_rate_pct, and prop_mortality_ratio functions to determine mortality rates
- Added prop_solver function to solve for the missing value in a proportion
- Added reduce_single_digit function to sum all digits of a number to a single digit (useful for Numerology)
- Added various people as authors/contributors for their respective codes in both the DESCRIPTION file and in the functions themselves

- CRAN request for
`IAPWS95`

package to be corrected or archived which would impact this package. The functions requiring`IAPWS95`

have been re-written so that`IAPWS95`

can be removed from Imports

- CRAN request for
`listless`

package to be corrected or archived which would impact this package. The functions requiring`listless`

have been re-written so that`listless`

can be removed from Imports - Request from Matt Dowle to have
`data.table`

as Imports rather than Depends - Added English United States (en-us) as the language in the DESCRIPTION file
- Removed the
`financial`

package as Suggests as it was removed from CRAN - Added quotes around package names (standard evaluation) in README.md and in all function examples

- CRAN fix of example from PgivenG

- Revised the vignette and changed the vignette filename and title
- Added
`iemiscdata`

and`import`

as imported R packages (Issue #1 by jangorecki) - Added
`iemiscdata`

and`import`

as imports in functions as needed (Issue #1 by jangorecki) - Added the concr_mix_normal_strength function [Concrete Mix Design for Normal Strength (Normal-weight) Concrete] – Although that was the plan for version 0.9.6, this did not happen until version 1.0.0
- Added
`gsubfn`

and`fpCompare`

as imported R packages for the concr_mix_normal_strength function – Although that was the plan for version 0.9.6, this did not happen until version 1.0.0

- Added GNU Octave/MATLAB compatible trigonometric functions in degrees (cosd, acosd, sind, asind, tand, atand, secd, asecd, cscd, acscd, cotd, acotd, atan2d)

- Added
`ie2misc`

,`ie2miscdata`

as suggested R packages

- Added more examples to the README.md
- Revised the examples in these functions: Manningtri, Manningtrap, Manningrect, Manningpara, Manningcirc
- Updated the Open Channel Flow problems vignette

- Updated these functions: Manningtri, Manningtrap, Manningrect, Manningpara, Manningcirc
- Added an Open Channel Flow problems vignette
- Added
`install.load`

as a suggested R package

- Updated these functions: size, righttri, Manningtri, Manningtrap, Manningrect, Manningpara, Manningcirc

- Renamed lengths to length_octave
- Updated these functions: size, righttri, Manningtri, Manningtrap, Manningrect, Manningpara, Manningcirc
- Added
`iemiscdata`

as a suggested R package

- Initial release